NEWS CENTER

NEWS CENTER

Laser Cutting Machine of Laser Pneumatic Chuck

2022-04-11

Laser Cutting Machine of Laser Pneumatic Chuck:

1. After the laser cutting machine of laser pneumatic chuck is turned on, all axes will be operated back to the home position first.
2. Before feeding the pneumatic chuck back to the center, so that the feeding direction is consistent with the processing drawings, to prevent the pipe cutting position does not match with the drawings resulting in hitting the cutting head.
3. Adjust the corresponding pneumatic chuck air pressure according to the weight, the air pressure value is allowed to be 0.3-0.8Mpa, and the chuck should not exceed the maximum weight of the pneumatic chuck to avoid damage.
4. Use the check valve to keep the pressure inside the large pneumatic chucks, the pressure retention time can be up to 12 hours, if the jaws open in the process of cutting, need to stop immediately to check.
5. Do not disassemble or change the structure of the pneumatic chuck at will, so as not to cause the equipment can not be used normally, need to customize or have other needs can contact with our company to communicate.
6. Do not start cutting before closing the safety door, to avoid the workpiece flying out or cutting light source on the eye injury.
7. Should regularly lubricate the pneumatic chuck, so as to avoid abnormalities or damage caused by the lack of lubricant inside the bearings.